HP ProCurve 7102dl Reference Manual page 214

SROS Command Line Interface Reference Guide
show ip dhcp-server binding <client ip address>
Use the show ip dhcp-server binding command to display the Dynamic Host Client Protocol (DHCP)
server client table with associated information.
Syntax Description
<client ip address>
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show ip dhcp-server binding command:
ProCurve>enable
ProCurve#show ip dhcp-server binding
IP Address
10.100.23.64
5991-2114
Optional. Specifies a particular client IP address.
Client Id
01:00:12:79:00:8f:b3
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Lease Expiration
Aug 15 2002 11:02 AM
Enable Mode Command Set
Client Name
Router
212