SROS Command Line Interface Reference Guide
The following is sample output from the show ip policy-sessions all command:
ProCurve>enable
ProCurve#show ip policy-sessions all
Protocol (TTL) [in crypto map] -> [out crypto map] Destination policy-class
Src IP Address
Src Port
-------------------------------------------------------------------------------------------------------------------------------------------
Policy class "Public":
tcp (0) - inactive
192.168.1.142
1025
tcp (0) - inactive
192.168.1.142
1028
tcp (0) - inactive
192.168.1.142
1029
tcp (0) - inactive
192.168.1.142
1036
5991-2114
Dest IP Address
192.168.19.2
192.168.19.2
192.168.19.2
192.168.19.2
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
Dst Port
NAT IP Address
3135
10.10.10.1
3138
10.10.10.1
3139
10.10.10.1
3146
10.10.10.1
NAT Port
3605
3606
3607
3608
233