HP ProCurve 7102dl Reference Manual page 246

SROS Command Line Interface Reference Guide Enable Mode Command Set
show ip urlfilter statistics
Use the show ip urlfilter statistics command to display statistics for URL filter requests and responses.
Syntax Description
No subcommands.
Default Values
No default necessary for this command.
Usage Examples
The following example shows sample output from the show ip urlfilter statistics command:
ProCurve>enable
ProCurve#show ip urlfilter statistics
Current outstanding requests to filter server: 0
Current response packets buffered from web server: 2
Max outstanding requests to filter server: 3
Max response packets buffered from web server: 5
Total requests sent to filter server: 400
Total responses received from filter server: 400
Total requests allowed: 398Total requests blocked: 2
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 244