HP ProCurve 7102dl Reference Manual page 156

SROS Command Line Interface Reference Guide
exception report generate
Use the exception report generate command to immediately generate an exception report that contains a
snap shot of all current system processes.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following example immediately generates an exception report:
ProCurve>enable
ProCurve#exception report generate
Exception report generated.
ProCurve#show file flash exception-report-20050726071500
Using 47428 bytes
=====================================================================
VERSION
=====================================================================
ProCurve Secure Router 7102dl
SROS Version: J03.01.00
Checksum: 5D5AE64E, built on: Mon Jun 20 13:31:52 2005
Boot ROM version J03.01.00
Checksum: B1BC, built on: Mon Jul 18 13:11:02 2005
Copyright (c) 2005-2005, Hewlett-Packard, Co.
Platform: ProCurve Secure Router 7102dl
Serial number US449TR053
Flash: 33554432 bytes DRAM: 134217727 bytes
System uptime is 0 days, 0 hours, 14 minutes, 40 seconds
Current system image:
Current configuration-file:
5991-2114
"CFLASH:/SROS.BIZ"
"CFLASH:/startup-config"
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
154