Accounting Login - HP HSR6600 Command Reference Manual

accounting login

Use accounting login to configure the accounting method for login users through the console, AUX, or
Asyn port or through Telnet.
Use undo accounting login to restore the default.
Syntax
accounting login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none | radius-scheme
radius-scheme-name [ local ] }
undo accounting login
Default
The default accounting method for the ISP domain is used for login users.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The specified RADIUS or HWTACACS scheme must have been configured.
Accounting is not supported for login users who use FTP.
Examples
# Configure ISP domain test to use local accounting for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting login local
# Configure ISP domain test to use RADIUS accounting scheme rd for login users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting login radius-scheme rd local
Related commands
local-user
•
accounting default
•
• hwtacacs scheme
radius scheme
•
6