SROS Command Line Interface Reference Guide
Enable Mode Command Set
clear arp-entry <address>
Use the clear arp-entry command to remove a single entry from the Address Resolution Protocol (ARP)
cache.
Syntax Description
<address>
Specifies the IP address of the entry to remove.
Default Values
No default value necessary for this command.
Usage Examples
The following example removes the entry for 10.200.4.56 from the ARP cache:
ProCurve>enable
ProCurve#clear arp-entry 10.200.4.56
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
26