HP ProCurve 7102dl Reference Manual page 914

SROS Command Line Interface Reference Guide
backup priority <value>
Use the backup priority command to select the backup priority for this interface. This allows the user to
establish the highest priority backup link and ensure that link will override backups attempted by lower
priority links. Use the no form of this command to return to the default value. For more detailed
information on Frame Relay backup functionality, refer to the Functional Notes section of the command
backup call-mode <role> on page 904.
Syntax Description
<value>
Default Values
By default, backup priority is set to 50.
Usage Examples
The following example assigns the highest priority to this endpoint:
ProCurve(config)#interface frame-relay 1.16
ProCurve(config-fr 1.16)#backup priority 100
5991-2114
Sets the relative priority of this link (valid range: 0 to 100). A value of 100
designates the highest priority.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Sub-Interface Config Command Set
912