HP ProCurve 7102dl Reference Manual page 527

SROS Command Line Interface Reference Guide
spanning-tree max-age <seconds>
Use the spanning-tree max-age command to specify the interval (in seconds) the spanning-tree will wait
to receive Bridge Protocol Data Units (BPDUs) from the root bridge before assuming the network has
changed (thus re-evaluating the spanning-tree topology). Use the no form of this command to return to the
default interval.
Syntax Description
<seconds>
Default Values
<seconds>
Usage Examples
The following example configures a max-age interval of 45 seconds:
ProCurve(config)#spanning-tree max-age 45
5991-2114
Wait interval (in seconds) between received BPDUs (from the root bridge).
Range: 6 to 40.
20 seconds
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
525