HP ProCurve 7102dl Reference Manual page 470

SROS Command Line Interface Reference Guide
logging email address-list <email address> ; <email address>
Use the logging email command to specify one or more email addresses that will receive notification when
an event matching the criteria configured using the logging email priority-level command is logged by the
SROS. See logging email priority-level [error | fatal | info | notice | warning] on page 471 for more
information. Use the no form of this command to remove a listed address.
Syntax Description
<email address>
Default Values
By default, there are no configured logging email addresses.
Usage Examples
The following example specifies three email addresses to use when sending logged messages:
ProCurve(config)#logging email address-list
admin@email.com;ntwk@email.com;support@email.com
5991-2114
Specifies the complete email address to use when sending logged messages
(This field allows up to 256 characters.)
Enter as many email addresses as desired, placing a semi-colon (;) between
addresses.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
468