Aaa Group Server - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

aaa group server

Use the aaa group server command to group pre-defined RADIUS and TACACS+ servers into named
lists. For more detailed information on authentication, authorization, and accounting (AAA) functionality,
refer to the Technology Review section of the command aaa on on page 321. Use the no form of this
command to remove a configured server group. Variations of this command include:
aaa group server radius <name>
aaa group server tacacs+ <name>
Syntax Description
radius
tacacs+
<name>
Default Values
No default value necessary for this command.
Functional Notes
Use the radius-server command to specify RADIUS servers before adding them to a group. Likewise, use
the tacacs-server command to specify TACACS+ servers before adding them to a group. These
commands enter a mode for adding individual servers to the named group. Refer to
Command Set on page 1425 or
information.
The default group cannot be changed and includes all RADIUS servers in the order they were specified by
the radius-server commands. The same is true of TACACS+ servers specified by the tacacs-server
commands.
Usage Examples
The following example creates the named list myServers and enters the RADIUS group:
ProCurve(config)#aaa group server radius myServers
ProCurve(config-sg-radius)#
The following example creates the named list myServers and enters the TACACS+ group:
ProCurve(config)#aaa group server tacacs myServers
ProCurve(config-sg-tacacs+)#
5991-2114
Groups defined RADIUS servers.
Groups defined TACACS+ servers.
Specifies the name of the server list.
TACACS+ Group Configuration Command Set
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
Radius Group
on page 1427 for more
320