HP ProCurve 7102dl Reference Manual page 711

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

T1 Interface Configuration Command Set

remote-loopback

Use the remote-loopback command to configure the interface to respond to loopbacks initiated by a

remote unit (or the service provider). Use the no form of this command to disable this feature.

Syntax Description

No subcommands.

Default Values

By default, all interfaces respond to remote loopbacks.

Usage Examples

The following example enables remote loopbacks on the T1 interface:

ProCurve(config)#interface t1 1/1

ProCurve(config-t1 1/1)#remote-loopback

Chapters

Table of Contents