HP ProCurve 7102dl Reference Manual page 723

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set
backup auto-restore
Use the backup auto-restore command to configure the sub-interface to automatically discontinue backup
when all network conditions are operational. Use the no form of this command to disable the auto-restore
feature.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Usage Examples
The following example configures the SROS to restore the primary connection automatically when the
failure condition clears:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#backup auto-restore
5991-2114 © Copyright 2006 Hewlett-Packard Development Company, L.P. 721