Show System - HP ProCurve 7102dl Reference Manual
Secure router sros command line interface
Hide thumbs
Also See for ProCurve 7102dl:
- Configuration manual (1114 pages) ,
- Product end-of-life disassembly instructions (2 pages) ,
- Advanced management and configuration manual (1005 pages)
Table of Contents
Advertisement
SROS Command Line Interface Reference Guide
Enable Mode Command Set
show system
The show system command shows the system version, timing source, power source, and alarm relay
status.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following is sample output for the show system command:
ProCurve>enable
ProCurve#show system
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
280
Advertisement
Chapters
Table of Contents
