Resource Pool-Member <Pool-Name> [<Priority>] - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide
resource pool-member <pool-name> [<priority>]
Use the resource pool-member command to assign the interface to a resource pool, making it a demand
routing resource. Use the no form of this command to return to the default value.
Syntax Description
<pool-name>
<priority>
Default Values
By default, BRI interfaces are not assigned to a resource pool.
Usage Examples
The following example configures a BRI interface as a member of resource pool MyPool:
ProCurve(config)#interface bri 1/2
ProCurve(config-bri 1/2)#resource pool-member MyPool
5991-2114
Specifies the name of the resource pool to which this interface is assigned.
Optional. Specifies the priority of using this interface versus other interfaces
contained in the specified resource pool using a number 1 to 255. Lower numbers
indicate higher priority. Interfaces with the same priority are selected in
alphabetical order by interface name.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
BRI Interface Configuration Command set
589