HP ProCurve 7102dl Reference Manual page 90

SROS Command Line Interface Reference Guide
debug chat-interfaces <chat interface>
Use the debug chat-interfaces command to activate debug messages associated with chat AT command
driven interfaces. Debug messages are displayed (real-time) on the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<chat interface>
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages for the chat interface 0/1:
ProCurve>enable
ProCurve#debug chat-interfaces 0/1
5991-2114
Specifies the chat interface to debug in slot/port format.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
88