HP ProCurve 7102dl Reference Manual page 490

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Global Configuration Mode Command Set

Functional Notes

RADIUS servers (as defined with the radius-server command) may have many optional parameters.

However, they are uniquely identified by their addresses and ports. Port values default to 1812 and 1813

for authorization and accounting, respectively. If a server is added to a named group but is not defined by a

radius-server command, the server is simply ignored when accessed. Empty server lists are not allowed.

When the last server is removed from a list, the list is automatically deleted.

Usage Examples

The following example shows a typical configuration of these parameters:

ProCurve(config)#radius-server challenge-noecho

ProCurve(config)#radius-server deadtime 10

ProCurve(config)#radius-server timeout 2

ProCurve(config)#radius-server retry 4

ProCurve(config)#radius-server key my secret key

Chapters

Table of Contents