HP ProCurve 7102dl Reference Manual page 410

SROS Command Line Interface Reference Guide
ip firewall fin-timeout <seconds>
Use the ip firewall fin-timeout command to specify the time period allowed for Transport Control
Protocol (TCP) FIN. Use the no form of this command to return to the default setting.
Note
The SROS security features must be enabled (using the ip firewall command) for the
stateful inspection firewall to be activated.
Syntax Description
<seconds>
Default Value
By default, ip firewall fin-timeout is set to 4 seconds.
Usage Examples
The following example sets the TCP FIN time period to 120 seconds:
ProCurve(config)#ip firewall fin-timeout 120
5991-2114
Specifies the time period allowed for TCP FIN. Range is 0 to 4,294,967,295.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
408