SROS Command Line Interface Reference Guide
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest
null
Default Values
By default, this is set to null (meaning no authentication is used).
Usage Examples
The following example specifies that no authentication will be used on the Frame Relay interface:
ProCurve(config)#interface frame-relay 1.16
ProCurve(config-fr 1.16)#ip ospf authentication null
5991-2114
Optional. Selects message-digest authentication type.
Optional. Specifies that no authentication be used.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Sub-Interface Config Command Set
941