SROS Command Line Interface Reference Guide
Demand Interface Configuration Command Set
ppp chap password <password>
Use the ppp chap password command to configure an alternate password when the peer requires CHAP
PPP authentication. Use the no form of this command to remove a configured password. For more
information on PAP and CHAP functionality, refer to the Technology Review section for the command ppp
authentication [chap | pap] on page 865.
Syntax Description
<password>
Specifies a password using an alphanumeric string up to 80 characters in length.
Default Values
By default, there is no defined PPP CHAP password.
Usage Examples
The following example specifies a PPP CHAP password of my_password:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#ppp chap password my_password
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
870