HP ProCurve 7102dl Reference Manual page 85

SROS Command Line Interface Reference Guide
debug atm events
Use the debug atm events command to display events on all ATM ports and all virtual circuits. Debug
messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to
disable debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates ATM event messages:
ProCurve>enable
ProCurve#debug atm events
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
83