HP ProCurve 7102dl Reference Manual page 602

SROS Command Line Interface Reference Guide
test-pattern [ones | zeros]
Use the test-pattern command to activate the built-in pattern generator and begin sending the specified
test pattern. This pattern generation can be used to verify a data path when used in conjunction with an
active loopback. Use the no form of this command to cease pattern generation.
Syntax Description
ones
zeros
Default Values
No defaults necessary for this command.
Usage Examples
The following example activates the pattern generator for a stream of continuous ones:
ProCurve(config)#interface t1 1/2
ProCurve(config-t1 1/2)#test-pattern ones
5991-2114
Generates a test pattern of continous ones.
Generates a test pattern of continous zeros.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
DSX-1 Interface Configuration Command Set
600