SROS Command Line Interface Reference Guide
Enable Mode Command Set
Usage Examples
The following example creates a copy of the file myfile.biz (located in flash memory), names the new file
newfile.biz, and places the new file in flash memory:
ProCurve>enable
ProCurve#copy flash myfile.biz flash newfile.biz
The following example copies the file myfile.biz (located in flash memory) to compact flash memory
(naming the new file newfile.biz):
ProCurve>enable
ProCurve#copy flash myfile.biz flash newfile.biz
The following example copies the file new_startup_config (located in flash memory) to the primary
startup-configuration:
ProCurve>enable
ProCurve#copy flash new_startup_config startup-config
The following example copies the software file J03_01.biz located in flash memory to a TFTP server:
ProCurve>enable
ProCurve#copy flash tftp
Address of remote host?10.200.2.4
Source filename J03_01.biz
Destination filename J03_01.biz
Initiating TFTP transfer...
Sent 769060 bytes.
Transfer Complete!
The following example updates the ADSL interface with the software file J8459A_02_01_01.biz:
ProCurve>enable
ProCurve#copy J8459A_02_01_01.biz interface adsl 1/1
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
72