HP ProCurve 7102dl Reference Manual page 130

SROS Command Line Interface Reference Guide
debug isdn [cc-ie | cc-messages | endpoint | interface | l2-formatted |
l2-messages] bri <interface id>
Use the debug isdn bri command to activate debug messages associated with integrated services digital
network (ISDN) events in the SROS. Debug messages are displayed (real-time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
cc-ie
cc-messages
endpoint
interface
l2-formatted
l2-messages
<interface id>
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates all layer 2 formatted messages:
ProCurve>enable
ProCurve#debug isdn l2-formatted
5991-2114
Displays call control information elements.
Displays call control messages.
Displays endpoint events.
Displays ISDN interface events.
Displays layer 2 formatted messages.
Displays layer 2 messages.
Specifies the ISDN interface. Range is 1 to 255.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
128