HP ProCurve 7102dl Reference Manual page 249

SROS Command Line Interface Reference Guide
show lldp device <system name>
Use the show lldp device command to display specific neighbor information about a given neighbor.
Syntax Description
<system name>
Default Values
No default values are necessary for this command.
Functional Notes
If there is more than one neighbor with the same system name, all neighbors with that system name will be
displayed.
Usage Examples
The following example shows specific information about a neighbor for the system name Router:
ProCurve#show lldp device Router
Chassis ID: 00:12:79:02:DD:2A (MAC Address)
System Name: Router
Device Port: eth 0/1 (Locally Assigned)
Holdtime: 30
Platform: 3305
Software: Version: 08.00.22.sw1.D, Date: Mon Nov 01 10:28:55 2004
Capabilities: Bridge, Router
Enabled Capabilities: Router
Local Port: eth 0/2
Management Addresses:
Address Type: IP version 4, Address: 10.23.10.10
Interface Type: Interface Index, Interface Id: 2
5991-2114
Specifies the system name of the neighbor to display.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
247