HP ProCurve 7102dl Reference Manual page 395

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
ip domain-proxy
Use the ip domain-proxy command to enable DNS proxy for the router. This enables the router to act as a
proxy for other units on the network.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Functional Notes
When this command is enabled, incoming DNS requests will be handled by the router. It will first search its
host table for the query, and if it is not found there the request will be forwarded to the servers configured
with the ip name-server command.
Usage Examples
The following example enables DNS proxy:
ProCurve(config)#ip domain-proxy
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 393