SROS Command Line Interface Reference Guide
fast-idle <seconds>
Use the fast-idle command to set the amount of time the demand interface connection will remain active in
the absence of interesting traffic when there is contention for the demand resources being used by this
interface. Use the no form of this command to restore the default values.
Syntax Description
<seconds>
Default Values
By default, fast-idle is set to 120 seconds.
Usage Examples
The following example sets fast idle to 1,073,752 seconds:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#fast-idle 1073752
5991-2114
Specifies the number of seconds the interface will remain up in the absence of
interesting traffic. Range is 1 to 2,147,483.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
834