HP ProCurve 7102dl Reference Manual page 250

SROS Command Line Interface Reference Guide
show lldp interface <interface>
Use the show lldp interface command to display LLDP configuration and statistics for interfaces on this
device.
Syntax Description
<interface>
Default Values
No default values are necessary for this command.
Usage Examples
The following example shows LLDP configuration and statistics for the Ethernet 0/1 interface:
ProCurve#show lldp interface ethernet 0/1
eth 0/1 (TX/RX)
0 packets input
0 input errors
0 TLV errors, 0 TLVs Discarded
0 packets discarded
8799 packets output
0 neighbor ageouts
ProCurve#
5991-2114
Displays the information for the specified interface. Type show lldp interface ?
for a complete list of applicable interfaces.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
248