SROS Command Line Interface Reference Guide
debug isdn resource-manager
Use the debug isdn resource-manager command to activate integrated services digital network (ISDN)
resource manager errors and messages. Debug messages are displayed (real-time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated with the ISDN resource manager:
ProCurve>enable
ProCurve#debug isdn resource-manager
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
130