HP ProCurve 7102dl Reference Manual page 363

SROS Command Line Interface Reference Guide
ftp authentication <listname>
Use the ftp authentication command to attach AAA login authentication lists to the FTP server (see aaa
authentication login on page 314 for more information). This list is only used if the AAA subsystem has
been activated with the aaa on command.
Syntax Description
<listname>
Default Values
There is no default configuration for the list. If AAA is turned on but no ftp authentication list has been
assigned, FTP denies all login attempts.
Usage Examples
The following example attaches the authentication list, MyList, to the FTP server:
ProCurve(config)#ftp authentication MyList
The following example specifies that the SROS use the default AAA login list for FTP authentication:
ProCurve(config)#ftp authentication default
5991-2114
Specifies the named list created with the aaa authentication login command.
Enter default to use the AAA default login list.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
361