HP ProCurve 7102dl Reference Manual page 213

SROS Command Line Interface Reference Guide
show ip dhcp-client lease <interface>
Use the show ip dhcp-client lease command to display all Dynamic Host Client Protocol (DHCP) lease
information for interfaces that have dynamically assigned IP addresses.
Syntax Description
<interface>
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show dhcp-client lease command:
ProCurve>enable
ProCurve#show dhcp-client lease
Interface: ethernet 0/1
Temp IP address: 10.100.23.64 Mask: 255.255.255.0
DHCP Lease server: 10.100.23.207 State: Bound (3)
Lease: 120 seconds
Temp default gateway address: 10.100.23.1
Client-ID: N/A
5991-2114
Optional. Displays the information for the specified interface. Type show ip
dhcp-client lease ? for a complete list of applicable interfaces.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
211