HP ProCurve 7102dl Reference Manual page 866

SROS Command Line Interface Reference Guide Demand Interface Configuration Command Set
peer default ip address <address>
Use the peer default ip address command to specify the default IP address of the remote end of this
interface.
Syntax Description
<address> Specifies the default IP address for the remote end (A.B.C.D).
Default Values
By default, there is no assigned peer default IP address.
Functional Notes
This command is useful if the peer does not send the IP address option during PPP negotiations.
Usage Examples
The following example sets the default peer IP address to 192.168.71.50:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#peer default ip address 192.168.71.50
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 864