HP ProCurve 7102dl Reference Manual page 317

SROS Command Line Interface Reference Guide
Syntax Description
<listname>
default
none
line
enable
local
group <groupname>
group radius
group tacacs+
Default Values
The login list named default is the default list used to authenticate users when no other list is assigned.
Functional Notes
A user is authenticated by trying the list of methods from first to last until a method succeeds or fails. If a
method is unable to complete, the next method is tried. The local user database falls through to the next
method if the username does not appear in the database. The group falls through if the servers in the
remote group could not be found. See the command
529 for information on defining server groups.
Usage Examples
The following example creates a named list called myList and specifies using the local database as the first
method, myGroup as the second method, and line password as the third method for login authentication:
ProCurve(config)#aaa authentication login myList local group myGroup line
The following command sets the default authentication list for logins to use the local database as the first
fallback method:
ProCurve(config)#aaa authentication login default local
5991-2114
Specifies a named login list.
Specifies the default list used to authenticate users when no other list is assigned.
Access automatically granted.
Uses line password (Telnet 0-4 or console 0-1) for authentication.
Uses enable password for authentication.
Uses local user database for authentication.
Uses specified group of remote servers for authentication.
Uses defined RADIUS servers for authentication.
Uses defined TACACS+ servers for authentication.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
radius-server
on page 487 or
tacacs-server
on page
315