HP ProCurve 7102dl Reference Manual page 404

SROS Command Line Interface Reference Guide
ip firewall attack-log threshold <value>
Use the ip firewall attack-log threshold command to specify the number of attack mounting attempts the
SROS will identify before generating a log message. Use the no form of this command to return to the
default threshold.
Note
The SROS security features must be enabled (using the ip firewall command) for the
stateful inspection firewall to be activated.
Syntax Description
<value>
Default Values
By default, the ip firewall attack-log threshold is set to 100.
Usage Examples
The following example specifies a threshold of 25 attacks before generating a log message:
ProCurve(config)#ip firewall attack-log threshold 25
5991-2114
Specifies the number of attack mounting attempts the SROS will identify before
generating a log message (valid range: 0 to 4,294,967,295).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
402