HP ProCurve 7102dl Reference Manual page 162

SROS Command Line Interface Reference Guide
show atm [pvc | traffic] interface atm <interface>
Use the show atm command to display information specific to the ATM interface.
Variations of this command include the following:
show atm pvc
show atm [pvc | traffic] interfaces atm <interface>
Syntax Description
pvc
traffic
<sub-interface number>
<atm port interface>
<atm vcl interface>
Default Values
No default is necessary for this command.
Usage Examples
The following is sample output from this command:
ProCurve>enable
ProCurve#show atm pvc interface atm 1.1
Name VPI
atm 1.1 0
5991-2114
Shows ATM PVC information.
Shows ATM traffic information.
For ATM PVC information, enter the sub-interface (x.x) number.
For ATM port traffic information, enter the port ATM number 1-1023.
For ATM VCL traffic information, enter the ATM VCL number 1-1023.1-65536.
Encap
VCI Type SC
200 SNAP N/A
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Peak Avg/Min Burst
Kbps Kbps Cells
0 0 0
Enable Mode Command Set
Status
Active
160