Bridge <Group#> Protocol Ieee - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide
bridge <group#> protocol ieee
The bridge protocol ieee command configures a bridge group for the IEEE Spanning Tree Protocol. Use
the no form of this command (with the appropriate arguments) to delete this setting.
Syntax Description
<group#>
ieee
Default Values
By default, all configured bridge interfaces implement ieee spanning-tree protocol.
Usage Examples
The following example deletes the bridge protocol setting for bridge-group 17:
ProCurve(config)#no bridge 17 protocol ieee
5991-2114
Specifies bridge group number (1 to 255) (using the bridge command).
IEEE 802.1 Ethernet spanning-tree protocol.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
330