HP ProCurve 7102dl Reference Manual page 966

SROS Command Line Interface Reference Guide
spanning-tree bpduguard [enable | disable]
Use the spanning-tree bpduguard command to block BPDUs from being received on this interface. To
return to the default value, use the no form of this command.
Syntax Description
enable
disable
Default Values
By default, this command is set to disable.
Usage Examples
The following example enables the BPDU guard on the interface:
ProCurve(config)#interface frame-relay 1.16
ProCurve(config-fr 1.16)#spanning-tree bpduguard enable
5991-2114
Enables the BPDU block.
Disables the BPDU block.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Sub-Interface Config Command Set
964