HP ProCurve 7102dl Reference Manual page 538

SROS Command Line Interface Reference Guide
accounting connection
Use the accounting commands command to assign AAA accounting methods to lines. You must first turn
AAA on for this command to become available. For more detailed information on AAA functionality, refer
to the Technology Review section of the command aaa on on page 321. Use the no form of this command
to disable this feature. Variations of this command include the following:
accounting connection <name>
accounting connection default
Syntax Description
<name>
default
Default Values
By default, there is no accounting method applied to a line.
Usage Examples
The following example specifies using the default accounting method to account the outbound Telnet
sessions on this line:
ProCurve(config)#aaa on
ProCurve(config)#line console 0
ProCurve(config-console0)#accounting connection default
5991-2114
Applies a named accounting method to this line.
Applies the default accounting method to a line.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Line (Console) Interface Config Command Set
536