Login Management Commands; Cli Login Configuration Commands; Display Telnet Client Configuration - HP A8800 Series Fundamentals Command Reference

Login management commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.

CLI login configuration commands

All commands for Telnet are not available in FIPS mode. For more information about FIPS, see Security
Configuration Guide.

display telnet client configuration

Syntax
display telnet client configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display telnet client configuration to display the Telnet configuration when the router operates as a
Telnet client.
The command displays the source IPv4 address or source interface information of the Telnet client.
Related commands: telnet client source.
Examples
# Display the Telnet configuration when the router operates as a Telnet client.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.
The output shows that when the router operates as the Telnet client, the source IPv4 address for sending
Telnet packets is 1.1.1.1.
14