HP ProCurve 7102dl Reference Manual page 256

SROS Command Line Interface Reference Guide
show port-auth supplicant [interface ethernet <slot/port> | summary]
Use the show port-auth command to display supplicant information pertaining to port authentication. The
supplicant is the port that will receive services from the port authenticator.
Syntax Description
interface ethernet <slot/port>
summary
Default Values
No default value necessary for this command.
Usage Examples
The following example displays supplicant information for Ethernet interface 0/2:
ProCurve>enable
ProCurve#show port-auth supplicant interface eth 0/2
Interface: eth 0/2
Local Supplicant mode is enabled
Username:
Password:
Authorization Status:
Supp State Machine: CONNECTED
5991-2114
Optional. Shows port authorization supplicant information related to
a specific Ethernet interface.
Optional. Shows only basic information about each applicable
interface.
User1
securePass
yes
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
254