SROS Command Line Interface Reference Guide
Frame Relay Interface Config Command Set
frame-relay lmi-n393dce <counter>
Use the frame-relay lmi-n393dce to set the N393 LMI monitored event counter for the DCE endpoint.
Typical applications should leave the default value for this counter. Use the no form of this command to
return to the default value.
Syntax Description
<counter>
Sets the counter value (Range: 1 to 10).
Default Values
By default, the LMI monitored event counter for the DCE endpoint is set to four events.
Usage Examples
The following example sets the N393 threshold for five events:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#frame-relay lmi-n393dce 5
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
886