HP ProCurve 7102dl Reference Manual page 458

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
ip urlfilter allowmode
Use the ip urlfilter allowmode command to allow all URL requests in cases when all URL filter servers
are down. Use the no form of this command to block all URL requests when all URL filter servers are
down.
Syntax Description
No subcommands.
Default Values
By default, all URL requests will be blocked when all URL filter servers are down.
Usage Example
The following example permits all URL requests even when URL filter servers are down:
ProCurve(config)#ip urlfilter allowmode
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 456