SROS Command Line Interface Reference Guide
Enable Mode Command Set
TM
The show autosynch-status command displays the current AutoSynch
configuration and the statistics
TM
for the SROS.BIZ and startup-config files (if AutoSynch
is enabled).
ProCurve>enable
ProCurve#show autosynch-status
AutoSynch: Mode - Enabled
AutoSynch: SROS.BIZ synched
AutoSynch: startup-config synched
Usage Examples
The following example forces a synchronization of startup-config and SROS.BIZ (located in system flash
and compact flash memory):
ProCurve>enable
ProCurve#autosynch
AutoSynch: SROS.BIZ synched
AutoSynch: startup-config synched
ProCurve#
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
23