SROS Command Line Interface Reference Guide
authorization exec
Use the authorization exec command to assign AAA authorization methods to lines. You must first turn
AAA on for this command to become available. For more detailed information on AAA functionality, refer
to the Technology Review section of the command aaa on on page 321. Use the no form of this command
to disable this feature. Variations of this command include the following:
authorization exec <name>
authorization exec default
Syntax Description
<name>
default
Default Values
By default, there is no authorization method applied to a line.
Usage Examples
The following example specifies using the default authorization method on this line to authorize an exec
session:
ProCurve(config)#aaa on
ProCurve(config)#line console 0
ProCurve(config-console0))#authorization exec default
5991-2114
Applies a named authorization method to this line.
Applies the default authorization method to a line.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Line (Console) Interface Config Command Set
539