SROS Command Line Interface Reference Guide
Enable Mode Command Set
terminal length <lines>
The terminal length command sets the number of rows (lines) for a terminal session. This command is
only valid for the current terminal session and returns to the default value (24 rows) when the session
closes. Use the no form of this command to return to the default terminal length.
Syntax Description
<lines>
Number of rows (lines) for the terminal session (Range: 0 to 480).
Note
Setting the terminal length to zero disables paging.
Default Values
The default setting for this command is 24 rows.
Usage Examples
The following example sets the number of rows to 30.
ProCurve>enable
ProCurve#terminal length 30
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
294