HP ProCurve 7102dl Reference Manual page 47

SROS Command Line Interface Reference Guide Enable Mode Command Set
clear ip prefix-list <listname>
Use the clear ip prefix-list command to clear the IP prefix list hit count shown in the show ip prefix-list
detail command output. See show ip prefix-list [detail | summary] <listname> on page 235.
Syntax Description
<listname> Specifies hit count statistics of the IP prefix list to clear.
Default Values
No default value necessary for this command.
Usage Examples
The following example clears the hit count statistics for prefix list test:
ProCurve>enable
ProCurve#clear ip prefix-list test
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 45