HP ProCurve 7102dl Reference Manual page 252

SROS Command Line Interface Reference Guide
show lldp neighbors statistics
Use the show lldp neighbors statistics command to display statistics about LLDP neighbor table actions.
Syntax Description
No subcommands.
Default Values
There are no default values necessary for this command.
Functional Notes
This command shows information about the changes in this device's neighbor table. The information
displayed indicates the last time a neighbor was added to or removed from the table as well as the number
of times neighbors were inserted into or deleted from the table.
System Last Change Time
Inserts
Deletes
Drops
Age Outs
Usage Examples
The following example shows sample output for this command:
ProCurve>enable
ProCurve#show lldp neighbors statistics
System Last Change Time
10-15-2004 14:24:56
5991-2114
Shows the time at which the most recent change occurred in the neighbor
table.
Shows the number of times neighbors have been added to the table.
Shows how many times neighbors have been deleted from the table
because an interface was shut down.
Shows how many times the insertion of a new neighbor into the table failed
because the table was full.
Shows how many times neighbors have been removed from the table
because no new updates were received from that neighbor before its
time-to-live timer expired.
Inserts Deletes
55 3
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
Drops Age Outs
1 1
250