HP ProCurve 7102dl Reference Manual page 473

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
logging email priority-level [error | fatal | info | notice | warning]
Use the logging email priority-level command to set the threshold for events sent to the addresses
specified using the logging email address-list command. All events with the specified priority or higher
will be sent to all addresses in the list. The logging email on command must be enabled. See logging email
priority-level [error | fatal | info | notice | warning] on page 471 and logging email on on page 470 for
related information. Use the no form of this command to return to the default priority.
Syntax Description
Sets the minimum priority threshold for sending messages to email addresses specified using the logging email
address-list command.
The following priorities are available (ranking from lowest to highest):
Error
When selected, events with error and fatal priorities are logged.
Fatal
When selected, only events with a fatal priority are logged.
Info
When selected, all events are logged.
Notice
When selected, events with notice, warning, error, and fatal priorities are logged.
Warning
When selected, events with warning, error, and fatal priorities are logged.
Default Values
<priority> warning
Usage Examples
The following example sends all messages with warning level or greater to the email addresses listed
using the logging email address-list command:
ProCurve(config)#logging email priority-level warning
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 471