SROS Command Line Interface Reference Guide
Frame Relay Sub-Interface Config Command Set
backup auto-backup
Use the backup auto-backup command to configure the sub-interface to automatically attempt a backup
upon failure. Use the no form of this command to disable automatic backup on an interface.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically attempt backup upon a failure.
Usage Examples
The following enables automatic backup on the endpoint:
ProCurve(config)#interface frame-relay 1.1
ProCurve(config-fr 1.1)#backup auto-backup
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
901