Debug Ip Ospf - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

debug ip ospf

Use the debug ip ospf command to activate debug messages associated with OSPF routing operations.
Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
adj
database-timer
events
flood
hello
lsa-generation
packet
retransmission
spf
tree
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following is an example of debug ip ospf command results:
ProCurve>enable
ProCurve#debug ip ospf flood
OSPF: Update LSA: id=c0a8020d rtid=192.168.2.13 area=11.0.0.0 type=1
OSPF: Update LSA: id=0b003202 rtid=11.0.50.2 area=11.0.0.0 type=1
OSPF: Queue delayed ACK lasid=0b003202 lsartid=11.0.50.2 nbr=11.0.50.2
OSPF: Rx ACK lasid=c0a8020d lsartid=192.168.2.13 nbr=11.0.50.2
OSPF: Received LSA ACK LSA_ID=-64.-88.2.13 LSA_RT_ID=-64.-88.2.13
OSPF: Rx ACK lasid=00000000 lsartid=192.168.2.13 nbr=11.0.50.2
OSPF: Received LSA ACK LSA_ID=0.0.0.0 LSA_RT_ID=-64.-88.2.13
OSPF: Sending delayed ACK
OSPF: Update LSA: id=c0a8020d rtid=192.168.2.13 area=11.0.0.0 type=1
OSPF: Flooding out last interface
OSPF: Update LSA: id=0b003202 rtid=11.0.50.2 area=11.0.0.0 type=1
5991-2114
Displays OSPF adjacency events.
Displays OSPF database timer.
Displays OSPF events.
Displays OSPF flooding.
Displays OSPF hello events.
Displays OSPF link state advertisement generation.
Displays OSPF packets.
Displays OSPF retransmission events.
Displays OSPF shortest-path-first calculations.
Displays OSPF database tree.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
112