HP ProCurve 7102dl Reference Manual page 895

SROS Command Line Interface Reference Guide
hold-queue <queue size> out
Use the hold-queue out command to change the overall size of an interface's WAN output queue. Use the
no form of this command to return to the default settings.
Syntax Description
<queue size>
Default Values
The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay round
robin is 200.
Usage Examples
The following example sets the overall output queue size to 700:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#hold-queue 700 out
5991-2114
The total number of packets the output queue can contain before packets are
dropped. Range: 16 to 1000.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Interface Config Command Set
893